Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
The Boiler Industry: Past, Present and Future. Issue 3 and Volume 104. will be necessary and will continue to develop boiler technology to meet these goals. will put a boiler plant in to
Author: anil babu 5.1. Introduction. The increasing worldwide demand for cheap electricity and public concerns regarding environmental issues are leading to an increase in the efficiency and operating flexibility of coal-fired power plants (Bugge et al., 2006).A boiler, or steam generator …
Cited by: 4 Proven Technology Customers Speak Listen to the experts, including a large coal power producer, discuss the bene-ts of digital and optimization to lower heat rates and improve emissions. 2016 Cumulative Results* How Operations Optimization Works for Boilers The boiler optimization component of Operations Optimization uses multiple
We offer a wide range of boiler types including gas oil power plant boiler up to 75 TPH, biomass fired power plant boiler up to 75 TPH, coal fired circulating fluidized bed power boiler up to 280 TPH. Now there are hundreds of coal fired and coal mix-firing biomass fired power plant boilers running in …
ability for rapid load change rates are expected from a modern coal-fired power plant. This requirement is challenged by practical design considerations that higher steam parameters increase the wall thickness of boiler components and thus increasing thermal-mechanical stress potential and …
Author: mitz130 Click to view7:41Oct 22, 2016· Operation of boiler equipment design in Coal based Power Plant. Operation of boiler equipment design in Coal based Power Plant. New Technology 2017 - How does a Thermal power plant work / Boiler!
Author: Reuters Editorial Introduction to the coal power plant boiler project. The first phase of the power plant covers an area of over 65000m2, and the construction scale is four power plant boilers and three steam turbines. The total installed capacity is 75 MW and steam supply capacity is 5.749 million tons per year.
A major part of the DOE effort in the Office of FE is directed toward development of coal-fired electric power generation systems. The DOE program sponsors coal technology development from basic research through engineering, proof-of-concept testing, and …
The boiler in a coal-fired power plant converts chemical energy contained within the coal into heat energy that is captured and carried away in hot, high-pressure steam (Figure 3.2). Coal-burning technology has a long history and has seen many plant configurations, but the most important type of plant in modern use is the pulverized coal-fired
File Size: 1MB The RDK8 steam power plant at the Rheinhafen-Dampfkraftwerk electrical generation facility in Karlsruhe, Germany, has achieved a 47.5% net thermal efficiency while producing 919 MW of electricity. Today, RDK8 is the world’s most efficient coal-fired steam power plant.
Coal-Fired Power Plant Designs, Systems, and Components 29 peratures (3,500 psi and 1,050–1,100°F), increasing the efficiency and, generally, the capital cost of the unit (Kitto and Stultz, 2005; Gerdes et al., 2010). An emerging technology with higher efficiency is the ultra-
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.