Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
The exhaust gas pipe from the main engine to the exhaust gas boiler measured 50cm in diameter and was installed at the lower starboard side panel of the casing. A few hours after the vessel had berthed, the crew discovered that the exhaust gas boiler wall had heated up and was glowing red.
Dec 14, 2012· When arriving at anchorage, the exhaust gas boiler overheated, and the crew found that a soot fire had occurred. Tube stacks at gas outlet of exhaust gas boiler were found heavily damaged. More than half of the tube stack sectional area was melted down …
Exhaust Gas Boilers And Economisers Arrangement Auxiliary boilers on diesel main propulsion ships, other than tankers, are usually of composite form, enabling steam generation using oil firing or the exhaust gases from the diesel engine. With this arrangement the boiler acts as the heat exchanger and raises steam in its own drum.
Exhaust Gas Boilers The Clayton Heat recovery boiler operates on the same tried and tested principle as the world famous Clayton Steam generator. It is therefore the most compact, efficient, responsive and safest means of producing high quality steam or hot water from waste gas streams.
Dec 09, 2015· Exhaust gas boiler (EGB or EGE) or economiser described in this article is a smoke tube boiler with steam space, used for heat recovery from main engine exhaust gas. An illustration of the boiler is shown in figure below. The exhaust gas boiler is designed as a vertical boiler with a cylindrical shell surrounding the boiler tubes and water drum
Nov 24, 2016· Fire Tube boiler is the simplest form of the internal furnace, vertical fire tube boiler.Fire tube boilers are a portable boiler and it requires a small floor space. The steam rating in fire tube boilers doesn’t exceed 2500 kg per hour and pressure is limited to 10 bars.
File Size: 296KB An Exhaust Gas Boiler is a type of heat recovering system on ships which allows the exhaust heat of the main engine to produce steam while going out in the atmosphere. Every system, which is operated at high temperature, always has a risk of fire.
Introduction Fire Tube Steam Boilers are the most traditional technique for the production of saturated steam, high pressure hot water or superheated steam for a range of outputs from 250 to 50 000 kg/h (175 to 34 000 kW). Operating Principle Steam is generated by heating a large volume of water in a pressurised drum by means of hot gases, which are produced from the combustion of liquid or
Click to view6:18Aug 18, 2011· With durable and corrosion-resistant exhaust gas heat exchangers for oil and gas heating systems, BOMAT heating technology from Ueberlingen at Lake Constance has been setting benchmarks in the
Package Boiler. Packaged boiler is the most common and efficient type of fire tube boiler used in industry to produce steam and hot water. This boiler delivers to site as a whole package factory assembled. The package boiler only requires electricity, water, steam and fuel connections and it …
Because the exhaust gasses pass through tubes submerged in water, the boiler is referred to as a ‘fire/smoke tube boiler’. Water tube boilers have tubes full of water that are surrounded by exhaust gas i.e. the opposite of a fire tube boiler configuration. Fire Tube Boilers. Boiler Parts and Functions. Shell. Many of a fire tube boiler
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.