Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Jun 05, 2018· Comparison between Fire Tube and Water Tube Boiler can be done in 14 aspects. Those aspects are operating pressure, passage of material type in tubes, rate of steam generation, handling of load fluctuation, floor area requirement, efficiency, operator skills, design, maintenance cost are listed below in the tabular form.
The tube A is provided at its opposite ends, respectively, with the tubes C and D, tube C being the outlet for the water and steam and the tube D forming an inlet for the water. The hot gases enter through the top part of tube B, shown in Fig. 1, and discharge from the lower part thereof, so that the hot gases and water flow in countercurrent
Fire-tube boiler: Fire-tube boiler is those boiler in which the fire or hot gas is present inside the tubes and water surrounds these fire tubes. Since fire is inside the tubes and hence it is named as fire tube boiler. The heat from the hot gases is conducted through the walls of the tube to the water.
Mar 19, 2016· Difference between Fire Tube Boiler and Water Tube Boiler March 19, 2016 February 12, 2018 Admin 5 Comments boilers, Comparison. Sharing is Caring :)-Today I am going to tell you difference between fire tube boiler and water tube boiler. The boiler is divided into two main types. One is known as fire tube boiler and the other one is known as
There are a number of considerations to factor when determining the best boiler for your steam generation needs like operating pressure, steam pounds/hour output, demand fluctuation, general application requirments and total cost of ownership, etc. Two primary boiler types, the firetube boiler and the watertube boiler, are essentially opposite in design. The firetube boiler passes combustion
In water-tube boilers, the fluid with the higher density flows through the tubes and the fluid of lower density flows through a larger diameter external to the tubes (combustion chamber), ultimately resulting in water-tube boilers having higher overall heat transfer coefficient when compared to a fire-tube condensing boiler of the same size and
Fire tube Edit. Boilers can be classified into fire-tube, water-tube boilers or cast iron sectional depending on whether the heat source is inside or outside the tubes or in the case of the cast iron sectional the design and manufacture of the boiler. The goal in all cases is to maximise the heat transfer between the water and the hot gases
Jun 13, 2013· From a cold start, the firetube boiler, due to its larger water volume, takes longer to bring up to operating temperature or pressure vs. a similar sized watertube boiler. With less water volume, a watertube boiler can follow load swings more precisely and generally has better turndown.
Fire Tube Boiler Diagram. These boilers include a water level indicator; a pressure gauge, steam stop tap security tap, & a manhole like mountings for providing security as well as simplicity of working. The Fuel burns on the grate of the firebox in the boiler and the resultant hot-flue gases are permitted to flow in the region of cross tubes.
May 05, 2017· Water Tube Boiler: * Water circulates in tubes and heated externally by hot gases. Fuel is burned inside the furnace. i.e (hot gases- outside the tubes and water- inside the tubes). * Operating pressure = upto 100 bar * Efficiency = upto 90% * Ste
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.