Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Project Cost of 10 MW Circulating Fluidized Bed (CFB) plants can comply with environmental emissions regulations without flue gas treatments for sulphur capture and for NOx reduction. Because of the easier preparation of the fuel feed (crushed instead of finely ground), CFB is amenable to the use of lignite and co-firing with biomass.
10 MW Biomass based Power plant in Punjab, India The project is a 10 MW Biomass Power Plant of SEL Manufacturing Company Limited located in Ludhiana district of Punjab state in India . The project was setup to cater to the energy demand of the textile manufacturing facilities located in the same site.
This study modeled and optimized a 10-MW power plant by using Aspen Plus. The drying process was modeled with a typical rotary dryer. As the heating value of EFB increases with drying, the amount of EFB required to produce 10-MW is reduced. However, the fuel consumption of burner also increases.
The customer was planning a 10 MW biomass power plant in Sri Lanka and requested help in analysing and evaluating the proposed project. The primary fuel to be used was wood chips. Citec's scope. Citec’s solution was to setup a team of experts to complete the feasibility study.
Feb 28, 2019· 10 MW Biomass Power Plant Cost-ZBG Boiler The cost of 10 MW biomass power plant fall in a very wide range because of the wide variety of feedstock it uses, and the costs of biomass energy also depend on the distance of the feedstock from the biomass power plant. Similarly, Biomass plants also can be built over a wide range of investments.
Customers want to know the cost of 10 MW biomass power plant boiler is divided into two parts, the cost of biomass fuel and the cost of biomass boiler. The cost of biomass fuel. The cost of 10 MW biomass power plant fall in a very wide range because of the wide variety of feedstock it uses, and the costs of biomass energy also depend on the
Mar 13, 2020· Spain-based power producer Greenalia announced on March 10 that its 50 megawatt (MW) biomass power plant in Curtis-Teixeiro, Spain, began operations ahead of schedule and is currently producing and selling electricity.
A 10 MW biomass fuelled power plant boiler is a state-of-the art facility and will utilize approximately 16.8 green tons per hour (t/hr) of biomass fuel to produce approximately 43 tons/hr (94,000 lbs/hr) of 4.24MPa (600 psig) of high pressure steam at 400°C (750°F) and up to 10 megawatts (MW) of electricity in Peru.
Power Plant – PNG Biomass The power plant’s generation capacity will be provided by two 15 MWe power plant units, comprised of 2 x 18 MW steam boilers and 2 x 18 MW steam turbines. Each 18 MW boiler unit will be about 34 meters tall and will use stoker-grate technology, which is a robust design suitable for PNG conditions.
Please let me know what you have. I would like a biomass plant with as much electricity as possible. The budget is for a turnkey biomass plant. 10 MW biomass fired power plant boiler in Romania. Our engineer designed a set of 60 ton/h biomass fired boiler for the power plant …
10MW biomass power plant project. For a capacity of 10 MW and for a biomass fuel with average gross calorific value of 3150 Kcal/kg, the total fuel requirement is around 1.0 Lakh / annum. The collection and storage of biomass is the critical activity for any biomass project to …
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.