Product Thermal Capacity: 1 - 20 t/h
Working Pressure: 0.7 - 2 Mpa
Available Fuel: Nature gas, coke oven gas, biogas, methanol, liquid propane gas, diesel, heavy oil, light oil, crude oil, etc.
Available Industries: Heat supplying, chemical, food, textile, printing and dyeing, cigarettes and tobacco, fodder, pharmacy, building materials, brewery, rubber, hospital etc.
WNS series horizontal internal combustion boiler is a boiler shell type 3 passes wetback oil/gas fired boiler. After fuel is being atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, this is 1st pass; the high temperature smoke is collected in reversal chamber and then enters 2nd pass which is grooved tubes bundle area; after heat convection, air temperature gradually falls and goes to front smoke box and turn to 3rd pass, which is smooth tubes bundle area, and then enters chimney passing back smoke box and exhausted to the atmosphere.
1. Digitized manufacture
The key part such as material cutting, rolling, drilling are proceeded by advanced CNC machining process to reduce the assemble stress and extend boiler working lifetime.
The front and back smoke chamber plates are cut by CNC plasma cutting machine and looks tidy and beautiful.
2.Easy operation and maintenance
Fully automatically operating, with automatically adjustment and protection of burning, water level, temperature and steam pressure.
3. Longer working life
Smoke tube and tube sheet connection is expanded first to eliminate the gap between them, then adopt automatic argon arc welding to relief the stress and expand boilers working life.
Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will have 100% radiographic inspection.
Fin tube us ND steel or stainless-steel material which avoid low temperature corrosion.
Inspection procedure point is set up to guarantee the sequence of expanding and welding, avoid cracking of the tube sheet holes.
4. Less fuel consumption
High quality aluminum silicate fiber is used with fire clay insulation, to control the boiler body temperature below 45℃ to control heat lost.
Sufficient steam storage room and heating area makes boiler to generate high quality steam and high thermal power.
Condenser is added to reuse the waste heat of the exhausted smoke to increase feeding water’s temperature and reduce emission temperature, which can increase the thermal efficiency above 98% and save operating cost.
Biomass has many advantages as a fuel for boilers: It’s inexpensive, readily available in many regions, CO2 neutral, and its use warrants government subsidies. The fuel also presents unique
processes biomass power plants use to produce electricity from biomass fuel. Trucks deliver the biomass fuel to the biomass power plant site. Biomass fuel can be agricultural materials, urban wood waste, or forestry materials. Biomass fuel types are discussed further in …
Biomass plant with buffer and fossil fuel back-up Using both systems will obviously have a higher initial upfront cost, but has the advantage of combining the benefits of both systems. This maximises the heat generated by the biomass, whilst providing a backup system able …
AET Products AET designs and supplies complete biomass-fired boilers, combined heat and power (CHP) plants as well as power plants. Some of the benefits of an AET plant are: The unique AET Combustion System - Low flue gas emissions - High combustion efficiency - Low in-house power consumption and - Best Available Technology; High fuel flexibility
Grate-firing of biomass for heat and power production Article (PDF Available) in Progress in Energy and Combustion Science 34(6):725-754 · December 2008 with 8,285 Reads How we measure 'reads'
Biomass Energy – Some Rules of Thumb • 1 MW (1,000 kW) is enough power for 800 to • Typical “burn rate” is 1 gp BDT/MW hr. 1,000 homes. • Biomass fuel is p rchased on a Bone Dr • 10MW plant consumes 10 BDT/hr. purchased on a Bone Dry • Assuming that 12 BDT/ac Ton (BDT) basis. •Typical amount of Assuming that 12 BDT/ac
Grate Boilers for 2x10MW Biomass Power Plant. 2*10mw biomass power plant requires steam boilers to provide driving force. No matter chain grate type boilers or circulating fluidized bed boilers are available for the 10MW biomass power plant.
capacity, and can frequently sell extra power. Heat Rates The Williams Lake plant also holds the distinction of having the largest single boiler (60 MW) and the lowest heat rate (11,700 Btu/kWh) of any 100% biomass-fired power plant. Biomass-cofired coal plants can achieve slightly lower heat rates, as …
File Size: 986KB 5. Biomass Conversion Technologies . In the context of this document, biomass conversion refers to the process of converting biomass into energy that will in turn be used to generate electricity and/or heat. The principal categories of biomass conversion technologies for power and heat production are . direct-fired . and . gasification . systems.
File Size: 753KB Biomass fired chain grate hot water boiler is single drum water tube and fire tube boiler, combustion equipment is chain grate. Water wall tubes at left and right sides of furnace are the radiated heating area.This biomass fired chain grate hot water boiler uses the new scientific achievement, such as arch tube plate, screw fire tube to solve the problem of tube plate flaw, water wall tube
No. 76, Xin Da Road, Zhou tie Town, Yixing, Wuxi, China
0086-510-68530066, +86-13506151292Get Latest Price
Copyright © 2020.Zhongzheng Boiler Co., ltd. All rights reserved.